Normally a function closures also closes around its base clip.
If the base clip is removed, and then the function is executed, the
base clip then defaults to `this`.
However, Ruffle was incorrectly using the wrong base clip when
loading the `_root` and `_parent` registers in this case.
Fixes#5645.
This PR implements the `Loader.load` method, as well as
the associated `LoaderInfo` properties and events.
We can now load in an external AVM2 SWf: it will be added
as a child of `Loader` object, and will render properly
to the screen.
Limitations:
* The only supported `URLRequest` property is `url`
* `LoaderContext` is not supported at all - we always use the default
behavior
* Only `Loader.load` is implemented - we do not yet support unloading.
* We fire a plain 'Event' for the 'progress' event, instead of using
the (not yet implemented) 'ProgressEvent' class
The main changes in this PR are:
* The AVM2 `Loader` class now has an associated display object,
`LoaderDisplay`. This is basically a stub, and just renders
its single child (if it exists).
* `LoaderStream::Stage` is renamed to `LoaderStream::NotYetLoaded`.
This is used for both the `Stage` and an 'uninitialized'
`Loader.contentLoaderInfo`. In both cases, certain properties throw
errors, while others return actual values.
* The rust `Loader` manager now handles both AVM1 and AVM2 movie loads.
Previously, the viewport height and width were stored in
both `Stage` and the `RenderBackend`. Any changes to the viewport
dimensions (e.g. due to window resizing) needed to be updated in both
places to keep our handling of the viewport consistent.
This PR adds a new `ViewportDimensions` type, which holds the
width, height, and scale factor. It is stored inside the
`RenderBackend` impl, and is retrieved using the newly added
method `RenderBackend.get_viewport_dimensions`. After a `Player`
has been constructed, any code that needes access to the viewport
dimensions will ultimate go through this method.
Unfortunately, `Stage` needs to use the viewport dimensions
in `build_matrices`. Therefore, any code modifying the viewport
dimensions should go through `player.set_viewport_dimensions`,
which ensures that the stage matrices are rebuilt after the render
backend is updated.
When doing mouse picking, interactive children were considered
before all non-interactives, which could cause an `_droptarget` to
be set to an underlying movieclip even if a shape occluded it.
Now consider all children in render order so that the top-most
shape will capture the mouse input.
If we try to go to a frame that doesn't exist, or hasn't been loaded yet, we will stop on the last available frame, but skip any tags that would have run there. This is technically a desync, but it hasn't caused any problems so far as any further timeline interaction would trigger a rewind (which isn't affected by desyncs).
Of course, now that we're actually testing the tag stream position it *does* cause problems. We actually have to fix up the position to be correct even though it will never be used (hopefully). It may be prudent to do this outside of the `timeline_debug` feature as well in the future.
Each render backend keeps track of a stack of BlenModes,
which are pushed and popped by 'core' as we render objects
in the displaay tree. For now, I've just implemented BlendMode.ADD,
which maps directly onto blend mode supported by each backend.
All other blend modes (besides 'NORMAL') will produce a warning
when we try to render using them. This may produce a very large amount
of log output, but it's simpler than emitting each warning only once,
and will help to point developers in the right direction when they
get otherwise inexplicable rendering issues (due to a blend mode
not being implemented).
The wgpu implementation is by far the most complicated, as we need
to construct a `RenderPipeline` for each possible
`(BlendMode, MaskState)`. I haven't been able to find any documentation
about the maximum supported number of (simultaneous) WebGPU render
pipelines - if this becomes an issue, we may need to register them
on-demand when a particular blend mode is requested.
This PR implements the 'DisplayObject.transform' getters/setters,
and most of the getters/setters in the `Transform` class
From testing in FP, it appears that each call to the
'DisplayObject.transform' property produces a new
'Transform' instance, which is permanently tied to the
owner 'DisplayObject'. All of the getters/setters in
`Transform` operate directly on owner `DisplayObject`.
However, note that the `Matrix` and `ColorTransform`
valuse *produced* the getter are plain ActionScript objects,
and have no further tie to the `DisplayObject`.
Using the `DisplayObject.transform` setter results in
values being *copied* from the input `Transform` object.
The input object retains its original owner `DisplayObject`.
Not implemented:
* Transform.concatenatedColorTransform
* Transform.pixelBounds
When a DisplayObject is not a descendant of the stage,
the `concatenatedMatrix` property produces a bizarre matrix:
a scale matrix that the depends on the global state quality.
Any DisplayObject that *is* a descendant of the stage has
a `concatenatedMatrix` that does not depend on the stage quality.
I'm not sure why the behavior occurs - for now, I just manually
mimic the values prdduced by FP. However, these values may indicate
that we need to do some internal scaling based on stage quality values,
and then 'undo' this in certain circumstances when constructing
an ActionScript matrix.
Unfortunately, some of the computed 'concatenatedMatrix' values
are off by f32::EPSILON. This is likely due to us storing some
internal values in pixels rather than twips (the rounding introduced
by round-trip twips conversions could cause this slight difference0.
For now, I've opted to mark these tests as 'approximate'.
To support this, I've extended our test framework to support providing
a regex that matches floating-point values in the output. This allows
us to print out 'Matrix.toString()' and still perform approximate
comparisons between strings of the format
'(a=0, b=0, c=0, d=0, tx=0, ty=0)'
This is the last stub needed for Wonderputt to reach the
main game screen.
As far as I know, ActionScript cannot observe a frame being rendered,
so implementing this method isn't actually necessary for correctness.
The benefit of implementing this would be to make certain animations
appear smoother, since we'll render changes to the scene without
needing to wait for the next frame. However, actually rendering
*immediately* after the event would require some refactoring -
we have a `&mut UpdateContext` while running timers, but we'd need
to bail out and obtain a `&mut Player`.
Many of the class property defintiions were wrong -
instance methods were defined as class properties,
and class properties were defined as instance properties.
This allows Wonderputt to get further (it deliberately assigns
'null' to 'URLRequest.data'). We throw an exception for any other
value, to prevent confusing errors caused by attempting an
unexpected request to a web server with a missig body.
We currently lack the ability to preserve the original
`Value<'gc>` in the error, so we're forced to stringify the error.
This means that only typeless 'catch' blocks will work properly -
however, they're the only kind of 'catch' block that we currently
implement. Implementing support for typed 'catch' blocks will naturally
allow us to preserve the original 'Value<'gc>' in the 'throw'
implementation, since we'll need to switch to a custom `Error<'gc>`
type.
* avm2: Include class name in ScriptObject debug
Currently, the `ScriptObject` debug impl is almost useless -
while you determine if two printed objects are the same
by comparing the pointer value, you'll have no idea what
kind of object it actually is.
This PR now formats the `ScriptObject` output as a struct,
printing a (fake) "class" field containing the class name.
Before/after:
```
[ERROR ruffle_core::avm2::activation] AVM2 error: Cannot coerce Object(ScriptObject(ScriptObject(GcCell(Gc { ptr: 0x55f863936db8 })))) to an QName { ns: Private("Test.as$38"), name: "Second" }
[ERROR ruffle_core::avm2::activation] AVM2 error: Cannot coerce Object(ScriptObject(ScriptObject { class: "Object", ptr: 0x55ee0ad161e0 })) to an QName { ns: Private("Test.as$38"), name: "Second" }
```
Getting access to the class name from a `Debug` impl is tricky:
Developers can (and should be able to) insert logging statements
whereever they want, so any `GcCell` may be mutably borrowed.
Panics in debug impls are extremely frustrating to deal with,
so I've ensured that we only use `try_borrow` at each step.
If any of the attempted borrows fail, we print out an error message
in the "class_name" field, but we're still able to print the
rest of the `ScriptObject`.
Additionally, we have no access to a `MutationContext`, so we
cannot allocate a new `AvmString`. To get around this,
I've created a new method `QName::to_qualified_name_no_mc`,
which uses an `Either` to return a `WString` instead of allocating
an `AvmString`. This is more cumbersome to work with than the
nrmal `QName::to_qualified_name`, so we'll only want to use
it when we have no other choice.
An exception thrown by one event handler shoud not prevent other event
handlers from running on this same event. Some SWFs like Wonderputt
depend on this behavior, as they have buggy event handlers that throw
errors.
Calling `get_trait` copies the returned `Property`, so the caching
we performed in `PropertyClass` was never actually getting used.
Instead, we now store our `PropertyClass` values in a `Vec`
indexed by slot id. `set_property` and `init_property` now perform
coercions by going through the `VTable,` which writes the updated
`PropertyClass` back into the array.
FP allows code like
`class Foo { static var INSTANCE: Foo = new Foo(); }`
However, this breaks our current property type coercion setup -
we cannot resolve the type `Foo` when setting the property `INSTANCE`,
since `Foo` is still being constructed.
Fortunately, we can perform this 'coercion' by just checking if
the object's class name and domain match the type name and domain
of the property.
=