Backends that need synchronous preload behavior now explicitly ask for it as follows:
* `tests` - repeatedly call `preload` in a loop with an exhausted execution limit to stress-test the chunked preload
* `exporter`, `scanner` - synchronous/unlimited preload to match prior behavior
These may change in the future.
Previously, we would only use mergeAlpha if alphaBitmapData
and alphaPoint. However, mergeAlpha can be used even when
those parameters are null.
Some of the AVM1 argument handling was also incorrect - I've fixed
it, and extended the existing test with the output-based test
added for AVM2.
Previously, we would always use a transparent background,
even if the BitmapData is not transparent. This would normally
be corrected on the next frame when we copied the pixels to the
CPU. However, if an SWF ran `BitmapData.draw` on every frame,
this would never be corrected.
When rendering offscreen, we want the resulting image to use
premultiplied alpha, since the image will be stored in a texture.
However, when capturing an image in the exporter or test framework,
we want to use straight alpha, so that the resulting image can
be saved as a PNG.
Previously, we incorrectly used straight alpha everywhere, resulting
in incorrect output when using BitmapData.draw with transparency.
Our AVM2 `SharedObject` support is now *almost* equivalent
to our avm1 `SharedObject` support. We implement serialization
and deserialization for primitives, arrays, and `Object` instances
with local properties. We also implement serialization for `Date`,
but not `Xml` (since our AVM2 `Xml` class is just a stub at the moment).
This is enough to make 'This is the only level too' save level
progress to disk.
Currently, we always serialize to AMF3. When we implement
the `defaultObjectEncoding` and `objectEncoding`, we'll need
to adjust this.
We now check if a BitmapData has been disposed by checking
for a zero width or height (which cannot happen otherwise).
As a result, we no longer need the 'disposed' field on the AVM1
BitmapData object.
* avm2: Implement `BitmapData.draw` for `wgpu` backend
This method requires us to have the ability to render directly to a
texture. Fortunately, the `wgpu` backend already supports this in
the form of `TextureTarget`. However, the rendering code required
some refactoring in order to avoid creating duplicate `wgpu` resources.
The current implementation blocks on copying the pixels back
from the GPU to the CPU, so that we can immediately set them in
the Ruffle `BitmapData`. This is likely very inefficient, but will
work for a first implementation.
In the future, we could explore allowing the CPU image data and GPU
texture to be out of sync, and only synchronized when explicitly
necessary (e.g. on `getPixel` or `setPixel` calls).
* Rename `with_offscreen_backend` to `render_offscreen` and use Bitmap
* Don't panic when backend doesn't implement `render_offscreen`
The stub implementation was breaking code that relied on being
able to set a value for 'mask' and then retrieve it
(which used to work on a dynamic class like `MovieClip`).
Fixes some issues with our winding # calculation which would cause
incorrect results for hitTest.
* The convention for handling an intersection at endpoints was
not the same between lines and bezier curves.
* The bezier curve winding # function was not properly handling
some cases where the curve was strictly y-monotonic.
* Simplify the code a bit so that ray-curve intersections are
returned in a consistent order based on upward/downward crossing.
For now, I've left 'dropTarget' unimplemented - unlike in
AVM1, the drop target can be non-interactive objects like `Shape`,
so we'll need additional refactoring to implement it.
This allows 'This is the only level too' to be playable
This brings us closer to matching the Flash Player
enumeration behavior. Unfortunately, the precise enumeration
order for ScriptObject properties depends on the precise
order in the internal avmplus hashmap. This order is deterministic,
but adding/removing a property effectively randomizes it. Hopefully
there aren't any SWFS that depend on the *exact* order.
We previously used 'coerce_to_object', which produced
an error with `Value::Null`. Instead, we can just ues
`value.as_type_of`, which will correctly handle `null`
The test output for this test is sensitive to where we cut off each frame, because it doesn't stop all of it's handlers at the end of the test. Flash Player will just print lines forever so the end of the test is entirely arbitrary.
Reverts #7267
The image tests for the upcoming 'DisplayObject.stageRect' support
differ between Linux and Windows, so we need this support again.
To avoid the Linux filename churn that we previously encountered,
we now only include the platform and graphics backend in the filename
(e.g. `expected-linux-Vulkan`). This may result in some unexpected
'mismatched image' test failures if GHA updates to a version of Lavapipe
that changes rendering output, but this should be relatively easy to
notice.
This PR implements the `Loader.load` method, as well as
the associated `LoaderInfo` properties and events.
We can now load in an external AVM2 SWf: it will be added
as a child of `Loader` object, and will render properly
to the screen.
Limitations:
* The only supported `URLRequest` property is `url`
* `LoaderContext` is not supported at all - we always use the default
behavior
* Only `Loader.load` is implemented - we do not yet support unloading.
* We fire a plain 'Event' for the 'progress' event, instead of using
the (not yet implemented) 'ProgressEvent' class
The main changes in this PR are:
* The AVM2 `Loader` class now has an associated display object,
`LoaderDisplay`. This is basically a stub, and just renders
its single child (if it exists).
* `LoaderStream::Stage` is renamed to `LoaderStream::NotYetLoaded`.
This is used for both the `Stage` and an 'uninitialized'
`Loader.contentLoaderInfo`. In both cases, certain properties throw
errors, while others return actual values.
* The rust `Loader` manager now handles both AVM1 and AVM2 movie loads.
Previously, the viewport height and width were stored in
both `Stage` and the `RenderBackend`. Any changes to the viewport
dimensions (e.g. due to window resizing) needed to be updated in both
places to keep our handling of the viewport consistent.
This PR adds a new `ViewportDimensions` type, which holds the
width, height, and scale factor. It is stored inside the
`RenderBackend` impl, and is retrieved using the newly added
method `RenderBackend.get_viewport_dimensions`. After a `Player`
has been constructed, any code that needes access to the viewport
dimensions will ultimate go through this method.
Unfortunately, `Stage` needs to use the viewport dimensions
in `build_matrices`. Therefore, any code modifying the viewport
dimensions should go through `player.set_viewport_dimensions`,
which ensures that the stage matrices are rebuilt after the render
backend is updated.
Each render backend keeps track of a stack of BlenModes,
which are pushed and popped by 'core' as we render objects
in the displaay tree. For now, I've just implemented BlendMode.ADD,
which maps directly onto blend mode supported by each backend.
All other blend modes (besides 'NORMAL') will produce a warning
when we try to render using them. This may produce a very large amount
of log output, but it's simpler than emitting each warning only once,
and will help to point developers in the right direction when they
get otherwise inexplicable rendering issues (due to a blend mode
not being implemented).
The wgpu implementation is by far the most complicated, as we need
to construct a `RenderPipeline` for each possible
`(BlendMode, MaskState)`. I haven't been able to find any documentation
about the maximum supported number of (simultaneous) WebGPU render
pipelines - if this becomes an issue, we may need to register them
on-demand when a particular blend mode is requested.
This PR implements the 'DisplayObject.transform' getters/setters,
and most of the getters/setters in the `Transform` class
From testing in FP, it appears that each call to the
'DisplayObject.transform' property produces a new
'Transform' instance, which is permanently tied to the
owner 'DisplayObject'. All of the getters/setters in
`Transform` operate directly on owner `DisplayObject`.
However, note that the `Matrix` and `ColorTransform`
valuse *produced* the getter are plain ActionScript objects,
and have no further tie to the `DisplayObject`.
Using the `DisplayObject.transform` setter results in
values being *copied* from the input `Transform` object.
The input object retains its original owner `DisplayObject`.
Not implemented:
* Transform.concatenatedColorTransform
* Transform.pixelBounds
When a DisplayObject is not a descendant of the stage,
the `concatenatedMatrix` property produces a bizarre matrix:
a scale matrix that the depends on the global state quality.
Any DisplayObject that *is* a descendant of the stage has
a `concatenatedMatrix` that does not depend on the stage quality.
I'm not sure why the behavior occurs - for now, I just manually
mimic the values prdduced by FP. However, these values may indicate
that we need to do some internal scaling based on stage quality values,
and then 'undo' this in certain circumstances when constructing
an ActionScript matrix.
Unfortunately, some of the computed 'concatenatedMatrix' values
are off by f32::EPSILON. This is likely due to us storing some
internal values in pixels rather than twips (the rounding introduced
by round-trip twips conversions could cause this slight difference0.
For now, I've opted to mark these tests as 'approximate'.
To support this, I've extended our test framework to support providing
a regex that matches floating-point values in the output. This allows
us to print out 'Matrix.toString()' and still perform approximate
comparisons between strings of the format
'(a=0, b=0, c=0, d=0, tx=0, ty=0)'
We currently lack the ability to preserve the original
`Value<'gc>` in the error, so we're forced to stringify the error.
This means that only typeless 'catch' blocks will work properly -
however, they're the only kind of 'catch' block that we currently
implement. Implementing support for typed 'catch' blocks will naturally
allow us to preserve the original 'Value<'gc>' in the 'throw'
implementation, since we'll need to switch to a custom `Error<'gc>`
type.
An exception thrown by one event handler shoud not prevent other event
handlers from running on this same event. Some SWFs like Wonderputt
depend on this behavior, as they have buggy event handlers that throw
errors.
FP allows code like
`class Foo { static var INSTANCE: Foo = new Foo(); }`
However, this breaks our current property type coercion setup -
we cannot resolve the type `Foo` when setting the property `INSTANCE`,
since `Foo` is still being constructed.
Fortunately, we can perform this 'coercion' by just checking if
the object's class name and domain match the type name and domain
of the property.
Previously, we would create a fresh `LoaderInfo` object each
time the `loaderInfo` property was accessed. However, users can
add event handlers to a `LoaderInfo`, so we need to create and
store exactly one `LoaderInfo` object per movie (and stage).
To verify that we're correctly handling the storage of `LoaderInfo`,
I've implemented firing the "init" event. This required a new
`on_frame_exit` hook, so that we can properly fire the "init"
event after the "exitFrame" for the initial frame but before
the "enterFrame" of the next frame.
The current 'setInterval/setTimeout' implementation is
moved to 'core/src/timers.rs', and now works with both
AVM1 and AVM2 objects. The `flash.utils.Timer` class is implemented
mostly in ActionScript, with minimal modifications to the actual
Ruffle timer code.
* avm2: implement string replace where pattern is string and replacement is a function
* * removed unnecessary vec!
* fixed "no newline at the end of file"
* avm2: implement string.replace(...) with fn, for now regex only.
* string - added path for replacing regex with fn (replacing string
with fn is still unimplemented)
* regex - factored out common replace logic for when replacement is
a string and when it is a function
* added tests
* Addressed review comments
* removed tinkering cruft; formatting
* addressed review comments
* avm2: implement string.split for regex
* Compressed the testing for regexp and unwrapping thereof
* * Moved the split logic into the regex object
* Factored out a method for utf-16 matching
* Added tests
* formatting
* * replaced manual counting with storage.length()
* clippy cleanup
* Address review comments
* fix import path for WString
* remove redundant variable in return statement
* error passing via '?' instead of unwrap()