This is based on URLLoader, and doesn't actualy 'stream' data -
it all becomes available once the request finishes. However, this
is good enough to get Sniper Team working.
We now run all of the completion logic (including adding
the new DisplayObject as a child) in `Loader::movie_loader_complete`.
Previously, some of this logic was run from `Loader::preload_tick`,
which meant that loaded images did not have the logic run.
Also, `BitmapData` and `Bitmap` instances (with corresponding AVM2
objects) are now properly constructed for loaded images.
In a previous PR, I introduced an optimization that used
`copy_texture_to_texture` to copy directly from a BitmapData GPU
texture to a Stage3D GPU texture.
Unfortunately, this optimization is incorrect. A BitmapData GPU
texture can be modified at any time by normal AVM2 code - in
particular, in might be modified before we submit the encoded
`copy_texture_to_texture` command. This shows up in Sniper Team,
which re-uses BitmapData objects for multiple distinct textures.
The previous 'optimization' resulted in the wrong BitmapData contents
getting uploaded to a texture (since it was changed before the copy
command was submitted).
This matches the Flash Player documentation. Since we were
manually traversing the displayobject hierarching when firing
the event, we ended up firing duplicate events to parents
because bubbling was enabled.
wgpu requires buffer copy sizes and offsets to be 4-byte aligned.
Unfortunately, ActionScript can perform 2-byte aligned uploads
into an IndexBuffer3D.
To support this, we now keep a copy of the IndexBuffer3D on the CPU.
When performing an upload to the buffer, we round the offset down
and the size up to the nearest 4-byte aligned value. The cpu buffer
is used to fill out the write with existing data, so that we don't
corrupt the contents of the GPU buffer.
To avoid introducing a new RefCell, I've changed IndexBuffer3D
to use a `Box` instead of an `Rc` to store the trait object.
This allows us to pass a mutable reference down to the backend.
Early class construction is tricky - `Object` defines properties
that need to get copied into subclass instance vtables, but `Class`
defines `prototype`, which needs to be copied into the *class* vtable
of `Object`.
To accomplish this, I've split out instance vtable initialization
into a separate `init_instance_vtable`. We call
`object_class.init_instance_vtable` before
`class_class.init_instance_vtable`, but do things in the opposite
order for `into_finished_class` (`class_class.into_finished_class` is
called before `object_class.into_finished_class`)
The suggested changes to the navigate_to_url handling in the feedback to
the pull request have been implemented.
Therefore, this commit consists of multiple smaller changes:
1. The allow_javascript_calls variable has been removed (as a CLI
argument and in the navigator). Javascript calls are now always denied
on desktop. This is because setting the argument was useless; no
javascript was executed in any case, at most, just a browser tab opened.
Therefore, it makes no sense to include this option.
2. The NavigateWebsiteHandlingMode default value has been provisionally
changed from Confirm to Allow. In the future (after a GUI toolkit has
been added), the default confirmation windows should include a "Save
this preference" checkbox.
3. The NetworkingRestrictionMode enum has been renamed to
NetworkingAccessMode since the previous naming was counter-intuitive.
4. The NavigateWebsiteHandlingMode enum (and variables related to it)
have been renamed to OpenURLMode to simplify the name.
5. The documentation has been improved.
The networking API restrictions imposed by the allowNetworking parameter
& attribute have been added and partially implemented.
A new NetworkingRestrictionMode enum has been added to Ruffle (in Rust
and Typescript). It contains the values "All", "Internal" and "None" and
models the possible values of the allowNetworking parameter / attribute.
All means that all networking APIs are permitted in the SWF file,
Internal means that the SWF file may not call browser navigation or
browser interaction APIs and None means the same and that the SWF file
cannot use any SWF-to-SWF communication APIs either.
A respective allowNetworking variable has been added to the JS config.
Its default value is All.
Ruffle now recognises the allowNetworking parameter and attribute in the
SWF HTML object and parses it and sets the config variable
correspondingly if it's recognised.
Only if the variable is set to All, the external interface (responsible
for javascript calls in AS3) is created. Additionally, the variable is
given to the WebNavigatorBackend and saved in it. The navigator denies
all navigate_to_url calls if the variable hasn't been set to All.
Therefore, the API restrictions imposed by setting allowNetworking to
internal or none have been partially implemented.
Formatting has been improved.
New configuration options (changing the navigate_to_url call handling)
have been added. The default behaviour has been changed as well.
A NavigateWebsiteHandlingMode enum has been added to Ruffle (in Rust and
Typescript). It contains the values "Allow", "Confirm" and "Deny" and
describes how navigate_to_url website calls should be handled. Allow
means that all website calls are allowed, Confirm means that a
confirmation window opens with each website call and Deny means that all
website calls are denied.
A respective navigate_website_handling_mode variable has been added to
the desktop CLI and to the JS config. The default value is "Confirm" in
each. The variable is given to the navigator (ExternalNavigatorBackend
or WebNavigatorBackend, depending on the platform) and is saved in it.
On each navigate_to_url website call, the respective navigator is now
checking navigate_website_handling_mode and acts correspondingly (allows
it, opens a confirmation window or denies it).
This changes the default behaviour of Ruffle from allowing all website
calls to opening a confirmation window with each website call.
On Safari, the confirm window can cause the background music to stop,
but this seems to be an issue with Safari.
Closes#838.
Additionally, an allow_javascript_calls variable (which defaults to
false) has been added to the desktop CLI. The variable is given to the
desktop navigator and is saved in it.
If a navigate_to_url javascript call is executed on desktop, the
navigator is now checking allow_javascript_calls and acts
correspondingly (allows it or denies it).
This changes the default behaviour of Ruffle on desktop to not allowing
javascript calls.
Closes#9316.
`startDrag()` used to capture the offset between the mouse cursor
and dragged object. This is buggy when the dragged object position
is changed *while* being dragged, as the original offset no longer
holds.
Change the dragging mechanism to be based purely on mouse deltas,
eliminating said offset completely.
Fixes#10775.
Previously, `AsBroadcaster` was defined as a plain object. However,
it seems like in Flash it is defined as an empty function instead.
This means expressions like `new AsBroadcaster()` should return a
newly-created object. This is in opposition to the documentation
that says there is no constructor function for the `AsBroadcaster`
class.
Fixes#10673.
It's possible to have a DefineSprite tag with multiple frames,
but with a corresponding SymbolClass that directly extends
`Sprite` (and therefore does *not* extend `MovieClip`). When this
happens, Flash Player stops after the first frame.
Doing `super.someNonGetter` gives you back a function object.
We were previously attempting to call normal methods as though
they were getters. Additionally, we were failing to properly
get the property from the superclass vtable.
This ensures that we call the normal Array concat method
(or a method that overrides it). Some SWFs may define a *public*
concat method in an Array subclass, with a different signature.
Fixes#10552
1. toString and toLocaleString should only be defined on the prototype.
2. concat should only be defined as an as3 and proto property, not as an instace property.
3. Array doesn't have a valueOf defined directly on it.
This matches the Context3D docs. Calling 'present' swaps
the buffers.
I wasn't certain if we actually need a double-buffered depth
texture, but I included one just to be safe.
Now that most of the complicated Context3D methods have been
implemented, we can simplify the overall design. Instead of queueing
up commands and having `present` execute them in a loop, we
can execute each command immediately. The key insight is that
a `RenderPass` is only needed for `DrawTriangles`, so we don't
have to store it in `Context3D` and deal with complicated lifetime
issues.
The old behavior gave us implicit double-buffering behavior,
since nothing would get rendered until a 'present' call.
Now that a 'drawTriangles' call will immediately submit
a draw command, we need to implement actual double buffering.
This is done in the next commit.
The `Avm2::{dispatch, broadcast}_event` methods now log and swallow any
AVM2 error occuring during the dispatch, instead of repeating the
handling code for each caller.
This also introduces some behavioral changes:
- Errors messages are more consistent;
- For consistency with `broadcast_event`, `dispatch_event` panics if
given a non-event object to dispatch.